Superaudio Frequency Round Bar Bolt Nut Induction Hot Forging Equipment

 5% off Monthly Deals Superaudio Frequency Round Bar Bolt Nut Induction Hot Forging Equipment  Main Feature1. IGBT inversion technology reduce operating cost.2. The absolute load merit rate design, can work continuously for 24 hours.3. The digital phase locked realizes following frequency automatically.4. Design in modules It s installed facility and use conveniently.5. The perfect protection function, insuring the reliability and easily maintaining of the equipments.6. The technique of converting frequency by resonance promotes efficiency of whole equipment by over 95% efficiently.7. Economically, and environmental protection, it can replace of the gas/ coal/ electronic tube induction heating machine.Technical ParametersModelJLC-30JLC-50JLC-60JLC-80Input power desire3 phase 380V 50/60HZOscillate power max30KW50KW60KW80KWMax input current48A63A90A135ADC current60A80A120A150AOscillate frequency10-30KHZ10-30KHZ10-30KHZ10-30KHZTiming1M-99.99M1S-99.99S0.01S-99.99S1M-99.99M1S-99.99S0.01S-99.99S1M-99.99M1S-99.99S0.01S-99.99S1M-99.99M1S-99.99S0.01S-99.99SCooling water desire0.2Mpa  0.3Mpa  0.3Mpa  0.4Mpa  Duty cycle100% 40°CNet weight60kg/30kg65kg/45kg70kg/45kg80kg/55kg The whole set includingItemName of machine or partsSpecification Amount1JLC-30/50/60/80KW Generator-1 pcs2JLC-30/50/60/80KW Transformer-1 pcs2Foot Fedal3 core1 pcs3Induction Coils-2 sets4Connect Cable-1 set5Instruction Manual-1 pcs6Products Catalogue-2 pcsApplications1.End HeatingInduction forging refers to the use of an induction heater to pre-heat metals prior to deformation using a press or hammer. Typically metals are heated to between 1,100 and 1,200 °C (2,010 and 2,190 °F) to increase their malleability and aid flow in the forging die.Induction End heating is widely used for bolts making.2.QuenchingHardening uses heat and rapid cooling (quenching) to increase the hardness, strength and/or durability of steel. Heating steel or iron above their upper critical temperatures, modifies the crystal structure of the metal to a form called Austenite. With this atomic arrangement the carbon can then freely migrate to a new location.Hardening result depends upon a complex interaction of process parameters such as coil and quench design, material analysis, component geometry, heating frequency, heating power and quenching cycles.PackageFAQ