Small Scale Wood Saw Dust Carbonize Machine

Biomass  Carbonization Furnace Product introduction      Biomass two-layer continuous drum carbonization machine is special carbonization equipment which can carbonize coconut shell, walnut shell, apricot shell, hemp pole, sawdust, rice husk, bamboo, eucalyptus, mushroom residue, medicine residue, furfural residue, coffee residue, palm shell, peanut shell and sunflower seed shell in the carbonization machine under high-temperature conditions.      The carbonization machine adopts the advanced technology of recovery, purification, and circulating combustion of carbon monoxide, methane, ethane, and other combustible gases produced in the process of carbonization. It solves the problem of environmental pollution caused by thick smoke produced by ordinary carbonization furnace in the carbonization project, and solves the heat energy problem required by the equipment, fully realizes self-sufficiency, and improves the continuity and economy of the equipment We should make full use of the agricultural and forestry residues to turn waste into treasure and contribute to the greening environment.Applicable Material  It is suitable for carbonizing coconut shell, cashew husk, walnut shell, apricot shell, hemp pole, sawdust, rice husk, bamboo, eucalyptus, mushroom residue, medicine residue, furfural residue, coffee residue, palm shell, peanut shell, etc.Working Principle Biomass two-layer continuous drum carbonization machine is professional equipment for continuous high-temperature heating and carbonization of biomass under the condition of no oxygen and poor oxygen. It is composed of a two-layer carbonization machine, a preheat wood powder burner (or gasifier, natural gas burner), a combustible gas purification device, an external heating furnace of a carbonization machine, a feeding conveyor, cooling and carbon discharging machine and control, etc In this paper. The biomass is transported into the inner drum by the conveyor. The waste heat in the furnace is used to dry and preheat the materials to 200-250 ºC. The outer drum is provided with a combustible gas recovery pipeline at the end. The combustible gases such as carbon monoxide, methane, and ethane produced in the carbonization process are fully utilized to separate wood tar, wood acid solution, water, and ash through the flue gas purification system The pure combustible gas is sent to the heating furnace outside the carbonization machine for full combustion and heating to the carbonization machine to achieve reciprocating cycle heating and continuous production. The carbonization temperature is generally controlled at / 700-800 ºC. The carbonized products are discharged from the carbonization machine through water cooling, and the carbonization ignition is supplied by the preheating wood powder burner (or gasifier or natural gas burner).Charcoal Making Machine Advantages1. Material adaptability is strong. Biomass with water content less than 25% and particle size less than 30mm can be carbonized;2. The carbon product has good quality and a high carbonization rate. Carbon products can be used not only as fuel carbon, water smoke carbon but also as raw materials of metallurgical carbon and activated carbon;3. The carbonization depth control ability is strong. The residue of volatile matter in carbon products is 10-25%, which can be controlled on demand;4. The equipment is safe and environmental protection, stable operation, and long service life. Select a large number of new materials and new processes, use patent technology design, precision production, after a large number of practical tests, every detail is the pursuit of perfection, to ensure the quality of each set of equipment.Parameters ModelOutput(kg/h)Inner diameter(mm)Outer diameter(mm)Drum length(m)Dimensions(m)JTTJ1410/2300-50080014001010.0*2.1*2.8JTTJ1610/2500-700100016001010.0*2.3-3.0JTTJ1810/2700-1000120018001010.0*2.6*3.2JTTJ2010/21100-1300140020001010.0*2.9*3.9JTTJ2312/21500-2000160023001212.0*3.2*4.2JTTJ2512/22200-2500180025001212.0*3.5*4.5JTTJ2912/22700-3000220029001212.0*3.9*4.9JTTJ3212/23300-3800250032001212.0*4.2*5.3JTTJ3612/24000-4500290036001212.0*4.6*5.8Note: The price above is just for reference, please feel free to contact us if you want to know more about different models or production lines. We can offer free customized proposals. Our Company    Zhengzhou Jiutian Machinery Equipment Co., Ltd. is a comprehensive enterprise with research, design, manufacture, sales, and service in the drying industry. The company has 8 series of equipment such as dehydration series, drying series, carbonization series, crushing series, granulation series, conveying series, environmental protection series, and electronic control equipment, and has more than 150 kinds of high-tech products.   More than 300 customers from Southeast Asia, Central Asia, Eastern Europe, Africa, and South America came to our company for smooth communication. Most of our customers are very satisfied with the solutions and servi