New Touch Keypad Access Control Reader

Basic Info.Model NO.T30KTypeID Card ReaderCard TypeMifare, EMInterfaceWiegand 26/34,RS485Reading Distance5-10mApplicationParking, Hospital, Library, Company, Bank, StoreColorBlackWaterproofYesOutputWiegand26, Wiegand34 , RS485Lead Time3-5daysPackageCartonInstallationMounted on WallVoltage9-16V DCCertificateCeWarranty1yearMaterialABSTrademarkEworkTransport PackageCartonSpecification92*92*21cmOriginChinaHS Code8471900090Product Description Single Door Access Control Touch Keypad RFID Reader Specification*Wiegand 26bits/ Wiegand34,RS485 interface.*Less than 0.2 second Response Speed*Less than 0.5 seconds Proximity Time Distance:*5-10cm Proximity Range*Support ID (125 kHz) or Mifare1 (13.56 MHz Frequency) Card*-25 C to 75 C Ambient Temperature*10%-90% Ambient Humidity*Built-in Antenna*Built-in LED (Double Color LED)*Built-in Loud Speaker (Buzzer)*DC 5V-16V Working Voltage.Standard Direct Current 12V*70mA Working Current*100 Meters Communication Distance*Real Time Data Transfer*White or Black Color*PVC Case Material (Black Resin for Water-Proof Function)*92*92*18(mm)ModelCard Reader Access Control Keypad/non-keypadColorBlackVoltageDC9~16VCurrent≤100mAAmbient Temperature-25°C~75°CReading Range5~15CMOutput FormatWiegand26/34,RS485Card TypeEM-ID/Mifare-ICComunication DistanceWG≤100M,RS485≤1200MInstallationUsing + type screw driver to loosen the screw between the panel and motherboard.And then embed the motherboard to the side wall with the plastic plug and screws.Wire ConnectionRed DC 5V-16VBlack GNDBlue D1White D0Brown BEEPGreen LEDYellow AlarmNotice1.Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply2.When external Power is used, make sure sharing the power with Controller Box or using the same GND3.When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires