Wood Pellet Making Line Sawdust Pelleting Machine Line Biofuel Pellet Production Line

wood pellet making line sawdust pelleting machine line biofuel pellet production line  Product DescriptionBrife Introduction of wood pellet lineA complete pellet line's capacity is from smaller 500kg/h to bigger 30ton/h.Until now hundreds of pellet production lines are installed in China and abroad, such as France, Bulgaria, Romania, Hungary, Argentina, Belarus, Japan, Korea, India, Indonesia, Vietnam, Malaysia, Thailand, Laos, ect . Greatly welcome to visit our factory.Raw material: wood, waste wood and straws, etc. such as woodchips(palm, pine white pine, mahogany, pinus sylvestris, rubber tree), bamboo shavings, rice hust, seeds shells, peanut shells, halm, pennisetum, wheat straw, corn stalk, cotton stalks, alfalfa grass, bagrass, palm fiber, waste paper, non-physical materialSize:2-4mm (All the raw materials must be crushed into sawdust before goingto wood pellet machine.If not, you may need a wood chipper, wood crusher.)Moisture: Generally, 10-15% is best for producing good quality wood pellet.Product Parameters ModelPower(KW)Capacity(T)Weight(T)Size(mm)TYJ551-III901.55.52100*1300*2000TYJ551-III1101.5-25.82100*1300*2000TYJ551-III1322-2.562250*1400*2150TYJ760-III1602.5-392500*1600*2400TYJ860-III2203-413.52700*1700*2500How to design Wood log pellet line?---Diagram picture explanation for wood pellet linewood log is the most common raw material for making wood pellets.So, how to design a suitable wood pellet production line with wood log as raw material?First, a drum wood chipper is used to chip wood log into small size wood chips with 2.5-3.5cm.After that, hammer mill/wood crusher is used to grind wood chips into sawdust (6-12mm).Sometimes, a dryer is need ,as usually the MC of wood log is always about 30-50%,Under this condition, a dryer is need.Then, a vertical ring die wood pellet mill machine is used to press dried, wood sawdust into good quality wood pellets.Detailed PhotosDetailed explanation--Crushing ProcessDetailed explanation--Grinding ProcessDetailed explanation--Drying ProcessDetailed explanation--Pelleting ProcessDetailed explanation--Cooling ProcessDetailed explanation--Packing ProcessAfter cooling, the wood pellet will not directly enter into the fuel process, avoiding the wood pellet affected with damp. The packing process is necessary. In this process, we assemble our domestic Semi-Auto Packing Machine to you.CertificationsThe Certifications of Biomass Energy Wood Pellet LineCompany ProfileFAQQuestions asked FrequentlyQ: What is a pellet mill/pellet machine?A: A pellet mill/pellet machine is a machine that takes raw materials and shapes it into pellet form for multiple uses.Q: What kind of materials can be pelletized?A: Materials such as wood wastes, saw dust, corn cobs/stover/stalks, straw, switch grass, other grasses,  distillers grain, paper, etc. Basically, most Biomass materials that can be ground down to sawdust form can be pelletized.Q: What are pellets used for?A: Pellets are used mainly for heating, animal feed, and animal bedding. Many other applications may apply.Q: What size does my material need to be, to run through the pellet mill?A: All materials must be 5mm or less.Q: What size pellets can I make?A: We have dies sizes from 4mm-12mm, depending on the machine or your raw materials. Q: Do you ship worldwide?A: Yes. We have sent machines to Canada, Europe, Asia, Southeast Asia, Africa, South America, Ireland and Australia.Q: If I purchase a pellet mill, will you show me how to make pellets?A: Yes, we do. We will instruct you how to use it via video or phone or engineer avaliable abroad if you need./* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1