Kmc 650 3 Axis CNC Vertical Machining Center

KMC 3 axisFeatures1.UsingMeehanite castings to strengthen the internal structure. All of the products have been tempered to ensure high stability with no deformation.2. The linear rail is imported to provide high-speed and smooth motion performance, which is suitable for high-efficiency processing of products.3. The three-axis guide rail is using fully enclosed stainless steel protective cover, which has good chip removal protection performance.4. Using high-power servo motor to drive the feed to ensure high load capacity.5. Dust-proof electrical box and electrical components are using foreign brands, with good stability and good dust-proof effect.6. The wire holes are all waterproof, effectively preventing oil and gas from entering the box, ensuring the service life and performance reliability of the original electrical components.7. Each machine tool is subjected to laser and circular inspection according to international standards to ensure the machining accuracy. ItemsUnitKMC-650KMC-850KMC-855KMC-857KMC-956KMC-1160KMC-1167Axis travel X axis travelmm65080080055095011001100Y axis travelmm400500550700560600600Z axis travelmm500550550(600)900640600700WorkbenchWorkbench areamm800×4001000×5001000×5001000×5001000×5601200×6001300×600Maximum load-bearing capacity of worktablekg45060060060085010001000T-slot size/3-14×1005-18×805-18×905-18×905-18×1005-18×1005-18×100DistanceDistance from the end of spindle to workbenchmm100-600120-670120-670(720)150-850105-745120-720180-880Distance from the center of spindle to column guidewaymm450560590570610645690Spindletaper of spindle bore BT40BT40BT40BT40BT40BT40BT40Spindle speedrpm/min8000(or:12000)8000(or:12000)8000(or:12000)8000(or:12000)10000(or:12000)10000(or:12000)10000(or:12000)Spindle powerKW5.5/7.55.5/7.57.5/117.5/11D11D11D11FeedX/Y/Z Rapid feedm/min48/48/4848/48/4848/48/3648/48/3636/36/3636/36/3036/36/30Cutting feedmm/min1-100001-100001-100001-100001-100001-100001-10000ToolmagazineTool magazine capacity/20242424242424Heaviest tool weightkg8888888Maximum tool lengthmm240300300300300300300Tool magazine form/Knife armKnife armKnife armKnife armKnife armKnife armKnife armTool exchange time (tool to tool)s1.81.81.81.81.81.81.8Machine accuracyPositioning accuracy (X/Y/Z)mm±0.005/300±0.005/300±0.005/300±0.005/300±0.005/300±0.005/300±0.005/300Repeat positioning accuracy (X/Y/Z)mm±0.003±0.003±0.003±0.003±0.003±0.003±0.003MechanicalMachine weightkg4000480058005900630068007000Machine size (including chip removal)mm2250×2020×2450(2600+1100)×2300×2500(2600+1100)×2300×2700(2600+1100)×2300×2900(2750+1100)×2500×2900(3200+1100)×2400×2700(3200+1100)×2650×2850ItemsUnitKMC-1270KMC-1370KMC-1470KMC-1570KMC-1685KMC-1890KMC-2090Axis travel X axis travelmm125013001450150016501800200Y axis travelmm700700700700850900900Z axis travelmm700700700700850900900WorkbenchWorkbench areamm1400×7001500×7001500×7001600×7001700×8502000×9002000×900Maximum load-bearing capacity of worktablekg1100120015001500160018001800T-slot Size/5-18×1255-18×1105-18×1255-18×1507-18(5×125/2×100)7-18×1257-18×125DistanceDistance from the end of spindle to workbenchmm150-850160-860150-850140-840120-97095-99585-985Distance from the center of spindle to column guidewaymm740760760783960990990SpindleTaper of spindle bore/BT40(or:BT50)BT40(or:BT50)BT40(or:BT50)BT40(or:BT50)BT40(or:BT50)BT40(or:BT50)BT40(or:BT50)Spindle speedrpm8000(or:12000)8000(or:12000)8000(or:12000)8000(or:12000)8000(or:12000)8000(or:12000)8000(or:12000)/minSpindle powerKWD1511/1511/1511/15(or:15/18.5)11/15(or:15/18.5)11/15(or:18.5/22)11/15(or:18.5/22)FeedX/Y/Z Rapid feedm/min30/30/2424/24/2024/24/2024/24/2024/24/2024/24/2024/24/20Cutting feedmm/min1-100001-100001-100001-100001-100001-100001-10000ToolmagazineTool magazine capacity/24242424242424Heaviest tool weightkg8/158/158/158/158/158/158/15Maximum tool lengthmm300300300300300300300Tool magazine form/Knife armKnife armKnife armKnife armKnife armKnife armKnife armTool exchange time (tool to tool)s1.8/4.21.8/4.21.8/4.21.8/4.21.8/4.21.8/4.21.8/4.2Machine accuracyPositioning accuracy (X/Y/Z)mm±0.005/300±0.005/300±0.005/300±0.005/300±0.005/300±0.005/300±0.005/300Repeat positioning accuracy (X/Y/Z)mm±0.003±0.003±0.003±0.003±0.003±0.003±0.003MechanicalMachine weightkg730076001000011000150001650017000Machine size (including chip removal)mm(3300+1100)(3700+1100)(3700+1100)(4060+1100)×(4300+1100)×(5000+1100)×(5200+1100)××2750×2900×2850×3000×3050×31003050×33003400×35003400×35003400×3500  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1