HVAC Spiral Duct Machine Round Pipe Spiral Duct Forming Machine

Address: No. 33, Southeast Avenue, Changshu City, Suzhou City, Jiangsu Province, ChinaProduct FeatureSpiral Tube Former can be directly on the material round duct-making machine can be directly used with a flange bending machine, a sheet of the same board using a flange is essential with the flange bending machine process of practical equipment, but also can be used as a general ruffled machine use.The spiral tube coil is made of a spiral seam of the thin-walled tube, metal belt round, no welding, no leakage, no Water Leakage, used for air and bulk transport, instead of the traditional tin pipe (i.e. manual seam pipe).   A windpipe, a straight pipe without a manual mechanism the main purposes are as follows:1) air, including ventilation, such as air supply and exhaust, the range is very wide, such as factory workshop, the production site needs to be discharged due to outdoor air, harmful gas, and need to be transported to the indoor-outdoor air. Then it is necessary to use large flow and low-pressure air delivery pipe, a spiral duct is the most suitable, use galvanized iron pipe in general, corrosive and wet places stainless steel tube.2) to send cold air. The most common is the central air-conditioning pipe, this pipe needs to add heat preservation material.3). Hood Hotel, restaurant, and hotel kitchen have a lot of fumes, that need to discharge, using a circular duct in fume chimney. Here, the spiral duct is called the fume pipe.4) dust removal. There are many factories in the production workshop with a lot of dust, and need for specialized dust removal devices, in which the airflow is larger, can be used in a spiral duct.5) bulk material transport. In some factories, the production process needs to transport loose particles, in particular, the proportion of small, such as foam plastic particles, such as the use of a low-cost, good effect.    Details ImagesModelTube DiameterTube LengthThicknessStrip WidthStrip SpeedLockseamControlling SystemMain Motor PowerCutting Motor PowerWorking PressureDimensions(L*W*H)STF-1500100-1500mm120-8000mm0.4-2.0mm(Galvanized Steel) 0.4-1.2mm(Stainless Steel)137-140mm1-30m/minOutside tube, On the inside onPLC Automatic Control11KW5.5KW0.5-0.7KMP3500*2200*2850mm  Delivery/PackageFactory View FAQCompany ProfileExhibition/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1