Rubber Sheet Cutting Machine Waste Tire Cut-off Machine

Product Profile:   Vertical single-pole rubber cutting machine, mainly suitable for cutting natural rubber, synthetic rubber and other plastic materials, especially suitable for installation in near mixer, used to cut small pieces of rubber Our Machine Advantage:    Rubber cutting machine mainly include rubber cutting knife frame work cylinder base auxiliary table, hydraulic system, electrical system components, etc. Rubber cutting knife below the base with nylon plate, in order to protect the rubber cutting knife blade. Cut raw rubber, using artificial rubber on the bottom of the rubber cutting knife, and then press the start button, the rubber cutting knife in the piston rod driven along the rack slide down will cut rubber.  Machine is equipped with two up and down limit switch, to control the directional valve to change the movement direction of the rubber cutting knife, at the same time, also can protect the piston cylinder cylinder head Main Technical Parameter: ModelXQL-80XQL-160Motor Power(KW)5.57.5Rated cutting force(KN)80160Cutting width(mm)690790Cutting stroke(mm)680700Working Hydraulic press(Mpa)88Weight(KG)10001200About machine performance quality 1.       Q: How to guarantee the quality of outsourcing parts?           A: First choice more than 2 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return. 2.       Q: Which brand of electric part?           A: Use world famous brands, Siemens, Omron, Toshiba, ABB Customer can specify the brand. 3.       Q: Which PLC:           A: Siemens, Omron, Mitsubishi 4.       Q: How to control the quality?            A: There are inspectors for inspecting equipment quality and performance, after a ssembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours. About installation 1.        Q: When the guide engineer arrive at customer's factory?            A:  If need installation on site, engineer will arrive at factory within one week after machine arrived at factory. About after-sales service 1.        Q: What is the warranty time?            A:  2 years after machine arrived at factory 2.        Q: How to solve the problem?            A: Within one hour after getting customer' problem, inform the solution way, there are three ways for different conditions. 1, Which can be solved by phone or Email, it will be solved in two hours. 2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem). 3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.    Company Profile Qingdao MaoYuanFeng Machinery is a dedicated company to provide high quality rubber machinery to worldwide customers.Our solutions:Tire plant solutionTube plant solutionConveyor belt plant solutionRubber mat plant solutionWaste tire recycling plant solutionReclaimed rubber plant solutionRubber product plant solutionWe are manufacturer and dealer of various kind of rubber machines including rubber processing machines, rubber product making machines.Our products:Tire making machines:Rubber anbury mixer, internal mixer, dispersion kneader, two roll mill, TSR, batch off machine, extruder, calender, building machine, curing press machine.Conveyor belt making machines:Vulcanizing press.Rubber mat making machinesInner tube making machines After Sales ServiceGlobal headquarter: Qingdao, ChinaBranches: Thailand, Sri Lanka.ServicePlant engineering                    - We provide FREE layout design for new plant.Supplier Integrity                    - 24/7 working machines, extremely reliable.Plant Installation Support      - Installation&commissioning service.Spare Parts                              - Long lasting parts are manufactured by us, always available.Maintenance/Optimization     - Overseas engineers available.Training                                    - We provide FREE training for new plant.Raw Materials                          - Raw material support exported from China.You May Like   FAQ 1.       Q: How to guarantee the quality of outsourcing parts?          A: First choice more than 2 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.2.       Q: Which brand of electric part?          A: Use world famous brands, Siemens, Omron, Toshiba, ABBCustomer can specify the brand.3.       Q: Which PLC:          A: Siemens, Omron, Mitsubishi4.       Q:How to control the quality?           A: There are inspectors for inspecting equipment quality and performance, after a ssembly, machine run continuously for at least 12 hours at one time, Total running time should