Rock Drilling Tools Stone Mining Tools Slab Cutting

Diamond wire saw for granite quarryingThe characteristics:Diamond wires quarrying technique is a revolution for mining stone.This technique has following advantages in mining:1: improving the quarrying efficiency,2: working safely and protect environment well.3: High performance brings good sized blocks without inner breaks, and can exploit large dimension blocks with low quarry cost.4: We can provide different support designs and sizes beads according to the stone types5: We have independently developed the special rubber and vulcanized technique to ensure that the diamond wires can work in all sorts of bad environment.Specification(mm)Beads/mReinforcementUsageΦ11.540RubberGranite QuarryΦ1237/40RubberGranite QuarryΦ12.538/40RubberGranite Quarry  Diamond wire saw for marble quarryThe characteristics:1: The diamond wire quarrying technique can highly improve the quarrying efficiency, reduce the waste of mining resource,2: It can exploit large dimension blocks. At the same time, it can be operated safely and it is good for environment protection.3: Independently developed the special rubber and vulcanized technique to ensure that the diamond wires can work in all sorts of bad environment.4. The rubber and cable sticking together tightly makes good bonding, and this can be more strikes during the work.5. The vulcanised rubber easily withstands increases in temperature caused by badly controlled water spraying, which often happens in a quarry.6. Strong flexibility can reduce the cut-in-one-side problem, and protect cable well when it used for small curvature radius(beginning and end of quarry cuts).SpecificationReinforcementBeads numberCutting materialLine speedCutting speedWire lifeDia11.5mmRubber40/m Hard marble20-30m/s5-10 m2/h15-25m2/mDia 11.0mm Rubber37/mMiddle hard marble20-35m/s10-15 m2/h20-35m2/mDia 10.5mm Rubber33/mSoft marble25-35m/s15-20 m2/h30-50m2/mDia 11.0mmSpring+Plastic30/mHard marble20-30m/s5-10 m2/h15-25m2/mDia 11.0mmSpring+Plastic30/mMiddle hard marble20-35m/s10-15 m2/h20-35m2/mDia 10.5mm Spring+Plastic28/mSoft marble25-35m/s15-20 m2/h30-50m2/m  The diamond wire saw is used for block squaring:Product features:1.The use of diamond wire for stone profilling,with narrow kerf width and high quality cable insure less breakage and good tension,bring beter performance in tough environment.2. This wire saw works in low noise,safe and eco-friendly.3. High effection, low cost, low waste4. Cutting smooth and process accurate5. Safe and environmental protection.6. The profile wire saw can process a variety of special-shaped stones, and the cutting angle and orientation can be adjusted arbitrarily.ApplicationCoatingDiameter(mm)Beads No.HardnessWire SpeedCutting LifeGranite squaringPlastic10.533Soft28-301.5-3.015-25Granite squaringPlastic11.037Medium23-261.0-2.512-15Granite squaringRubber11.540Hard20-250.5-1.08-12Marble squaringPlastic10.533Soft30-353-630-40Marble squaringPlastic11.037Medium25-282-425-30Marble squaringRubber11.540Hard23-251-220-25  Diamond wire saw for granite profilingDiamond profiling wire saw is mainly used for granite block cutting and special-shaped processing. In addition, this kind of wire saw can also be used for processing granite slabs, small blocks, curbstones, tombstones and other stone products. This product is mainly used on cnc wire saws, PLC controlled cutting, and can process arc-shaped stone slabs and cylinders with any pattern. In particular, this wire saw can be used for simple processing of hollow stone plates, as well as for cutting stone plates. It has the characteristics of high processing efficiency and wide cutting surface.Product features1.High cutting efficiency.2.Make the even and smooth slab.3.Low powder consuming and less raw material wasting.4.Safe amd eco-friendly with low noise.5.Easy manipulation with low cost.SpecificationAssembing Method  Beads/meterApplicationLine Speed(m/s)Φ9.0Plastic 37 Granite profiling20-28Φ8.8Plastic 37Granite profiling20-28Φ8.5Plastic 37Granite profiling20-28Φ8.2Plastic 37Granite profiling20-28Φ8.0Plastic 37Granite profiling20-28  Multi wire sawProduct features:Efficiency is measured by down feed per min.We can provide endless diamond wire.Our 7.3mm endless wires can cut more than 330-380 hours without break! It can help our client reduce the labor cost, eletricity cost and machine maintenance costs.Our 7.3mm endless wires are very good for Universo, Gaspari, Pedrini, Pellegrini and Bidese (Breton) multi wire machines.Product specifications:Specification(mm)Beads/mReinforcementCutting materialLine speed (m/s)Cutting speed    (m2/h)Wire life (m2/m)Φ6.437Plasticgranite20-280.4-1.812-30Φ7.237Plasticgranite20-280.4-1.812-30Φ7.537Plasticgranite20-280.4-1.812-30Φ8.037Plasticgranite20-280.4-1.812-30Φ6.437Plasticmarble28-351-420-80Φ7.237Plasticmarble28-351-420-80Φ7.537Plasticmarble28-351-420-80Φ8.037Plasticmarble28-351-420-80/* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(