Fk20-1bcdl Single Boom Face Drilling Rig

FK20-1BCDL single boom Face Drilling RigBrief IntroductionName: Single boom Hydraulic Face drilling rigModel: FK20-1BCDLPower of Diesel engine: 52KW/63KWPower of Electric motor: 55 KWSection(b×h): 2.5×2.5~6.0×6.0 mDimensions(L×W×H): 11200×1910×2200 mm Product Introduction FK20-1BCDL is a single boom electro-hydraulic drilling jumbo for fast and accurate drilling for small-vein underground mining and tunneling and construction applications. The jumbo is suitable for tunnel with coverage area max. up 6.0-meter x 6.1 meters with 15°gradeability at maximum load on four drive wheels. Drilling hole diameter range from 32mm to 76mm. The drill boom can rotate 360 degrees and is equipped with automatic anti-jamming function. It has a compact structure, stable performance and strong climbing ability. It is suitable for drilling operations on working faces, roofs, side panels and bottom plates with a section of 8-45m². Not only it can drill blast holes, but also drill bolts very conveniently. The Jumbo is equipped with new model FKG550 hydraulic rock drill, the impact frequency is 50-68Hz higher than other similar brand.FK20-1BCDL single boom surface mine drilling rig machineChassisDiesel engine:             Deutz F5L912WPower rating at 2300rpm:    52kWTorque at 1550rpm:         258N.mFixed seat for tramming:     YesFuel oil tank volume:        60LArticulated Steering:         ± 41°Travelling speed:           10 Km/hGradeability:               15°Horn beacon and reverse:    Yes"Four-wheel drive:            YesFOPS cabin:                 YesHydrostatic power steering:   Yes"Hydrostatic transmission:     YesFront axle:                 Dana112Rear axle:                  Dana112+311Clearance outside axles:      15°Hydraulic jacks, front:        2 extendableHydraulic jacks, rear:         2 extendableService brakes:          2 separate circuitsEmergency & parking brakes:  SHARElectric system:              24VBatteries:                   2 x 12V, 70AhDimensionsWidth:                1910mmHeight roof (up/down):  2200/2900mmLength:               11200 mmWeight:               11500KgRock DrillModel:                 FOR550Shank adapter:          R32 R38 T38Impact power:           24KWImpact rate:             60-75 HZImpact pressure:         17-21 MpaFeed impact force:       ≤425 JHydraulic Pressure max:  130 barRotation system:        Separate rotationRotation speed:          0-300 rpmRotation torque, max.:     980 NmWater consumption:       50 L/minLub. Air consumption:      5 L/sHole diameter:            32mm-76mmLength without shank:     600mmHeight over drill center:    88mmWeight:                  190 KgSound Level: