0-5V / 0-10V / 4-20mA Amplifier for Load Cell

0-5V / 0-10V / 4-20mA Amplifier for Load CellFeature 1. Using full-blown lines and reliable device for amplifying and transmitting of the resistance straintype weighing transducer,outputting the signal: 0~10V ,(0~5V) or 4~20mA, connecting with PC or PLC to consist measuring control system;2. Input signal: 0~2mv/v;3. Output signal: 105 outputting 0~10V (0~5V), 106 outputting 4~20mA;4.Supply power: DC24V(min18v,max36v);5.Dimensions(mm):100×68×55;6. Linearity: 0.02%FS.Technique Datas:Linearity0.02%FSinput signal range6~30mAZero range0~60%Adjustable full-scale range6~30mVSensor excitation power9 ~ 12V adjustable output voltage, current limiting with short circuit protection ≤200mAZero hysteresis rangeVoltage signal: 0 ~ 5VCurrent signal: 0 ~ 20mA (load resistance ≤500Ω)Excitation power supply temperature stability25ppm/ºCSensor excitation power9 ~ 12V adjustable output voltage, current ≤200mA, with short circuit current limit protectionPower supplyAC220±22V,50HZA or DC24±1V or DC12±1VPower consumption About5VAWorking temperature-10~50ºCtemperature≤80%RHWiring Box160 × 152 × 67mm (height × width × thickness)(Not including connectors)92(L)×63(W)×32(H)mm,48(L)×33(W)×17(H)mmElectrical connection1. QA-105/106 are all using inputting/outputting joints, connecting separately the input signal of transducer and the output signal of module.2. The request for signal cable: transmitter use plastic waterproof joint,;The request for Cable diameter:6±0.3(mm).3. The connection type of the transducer signal inputting terminals corresponding to connecting line terminals:V+: Excitation +;GND: Excitation -;IN+: output signal +;IN-: output signal -.4. The connection type of the module signal inputting terminalscorresponding to connecting line terminals:OUT: the terminal of transmitter signal outputting;DC: 24V amplifying/Excitation+;GND: amplifying / Excitation-ground.The adjusting and the ordering instrument of the product: 1.The correct connecting the transducer with the supply power, after 10 minutes powering on, when the transducer is out off load ,to adjust the potentiometer which shows "Z" making the outputting for 0Vor 4mA; Adding to the standard load, adjusting the potentiometer which shows "S" making the outputting for 10V(5V) or 20mA.2. The transducer power supply of 105 and 106 amplification transmitter:Standard: 15V, Delicate: 10V.3. Please explain the sensitivity and the output resistance of thetransducer, when ordering.  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1