Light Weight Network Audio Cable Tester Hv Cable Test Equipment

PRODUCT: Grewin 640Hz 1280Hz intelligent Cable identifier for cable fault tester RCI-602R INTELLIGENT CABLE IDENTIFIER RECIEVER:  Large  flexible clamp coil : Along with the low-voltage pulse reflectometry, our systems implement advanced high-voltage pre-location technologies that allow to determine the distance to faults of various types with a minimal harmful effect on the cable lines.High level of safety during the testing with our cable test vans and mobile systems is ensured by built-in protection against overcurrent, overvoltage and overheating, as well as by the use of a continuous grounding monitoring, vehicle door closure sensors and self-health check monitoring.High speed sample system and high bandwidth input circuit are integrated in the tester to get the exact reflection curve of signal so that the distance of fault point to signal sample point can be calculated in high accuracy and high resolution Special sound location tester configuration can be applied to locate the fault point more exactly.The cable fault tester is suitable for measuring power cables, high-frequency coaxial cables, local telephone cables, street lamp cables, low-resistance of short-circuit, open-circuit disconnection faults, and various materials of various materials with different cross-sections and different media. Leakage and high resistance flashover faults. A powerful cable management system that automatically generates test reports.It can test a variety of 35KV under different voltage grade, different sections, different media and all kinds of material of power cable faults, including: open circuit, short circuit, low resistance, high resistance, high resistance leak flashover fault.It can be any cable length measurement of radio wave propagation in the known speed.It can test the power cables buried path and buried depth.route tracing evaluation of electric lines and cables. BEFORE USING:For different countries and zones, we try to offer different user settings for choice.Now the power system frequency and depth measurement unit is optional.1. Factory setting: default power frequency 50Hz2. Optional setting as below:1. GENERAL DESCRIPTION1.1 GENERAL :RCI-602 is a high performance cable identification system.It consists a transmitter and a receiver, can be used to for both running cable and dead cable.Running cable should be three-core sheath cable and it is high accuracy and easy to use.1.2 FUNCTION FEATHER:l Used to for both running cable and dead cable.Running cable should be three-core sheath cablel 50Hz/60 Hz cable load current measurement function.l Multiple signal output method: direction connection and clamp couplingl High power output and adjustable with auto impedance matching and auto protectionl Identification function: to display the identification result directlyl All-digital high accuracy sampling process with narrow receiving transmission bands,high anti-jamming capability to fully inhibit the inference from the nearby running cable and pipe power frequency and harmonic wave.l Big capacity Li-on batteries series,support auto power off when low battery or long time no operationl Solid case and light weight easy to carry  1.3 SPECIFICATION:1.3.1 Transmitter:l Output: Direct Connection output, Clamp Coupling Outputl Output Frequency:640Hz (complex frequency), 1280Hz (complex frequency).l Output power: max. 10W, 10 levels adjustable, auto impedance matching.l Direct connection voltage: max. 150Vpp.l Overload and short circuit protection.l HMI: 320x240 LCD.l Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah.1.3.2 Receiver:l Input: soft flexible clampl Receiving frequency:- Active frequency: 640Hz,1280Hz- Power frequency: 50Hz/60Hzl Cable identification mode: soft flexible clampl Power frequencies measurement: range AC 1-1000A,accuracy +/-3%l HMI: 800X480 LCD,size 121x76mml Built-in battery: 2 X 18650 Li-on batteries, standard 3.7 V,6.8 Ah1.3.3 Other:l  Volume: transmitter 280x220x90mm,receiver 220x125x55mml  Weight: transmitter 2.3kgs, receiver 0.9kgsl  Charger:transmitter input AC 100~240V,50/60Hz,output DC8.4V,2Areceiver input AC 100~240V,50/60Hz,output DC 5V,2Al  Temperature: -10-40ºC,humidity 5-90%,elevation