High Quality Basic 5A Solar Controller

Basic Info.Model NO.LN-TY-BASEApplicationCollector Controller, Water Heater Controller, Solar System Controller, Charger Controller, Lighting Controller, Wind Controller, Solar Working Station, Voltage Controller, Thermal ControllerRated Charging Current5ARated Discharging Current5ATrademarkLeynewSpecificationCE, ROHSOriginGungdong, ChinaHS Code8537109090Product Description LN- TYCON-BASE is produced by our company independently developed a solar controller, it is mainly used for solar energy as the control system, used to control the solar battery charge of matrices and the battery to load control (e. G. LED lamps and lanterns) of discharge. The controller of rule by storage battery charging and discharging charge control, using PWM tandem charging loop, charging efficiency, has a variety of discharge and the protection and lightning protection, and other features, it is a stable and efficient solar controller. Main features1. Intelligent control is realized by using microprocessor and dedicated control calculation. 2. Four load working modes: Pure lighting control, lighting control & timing control, normally on or normally off. Lighting control & timing control mode can be set duration discharge. 3. Scientific management of battery: As it is overcharged, the battery will get boost charge. As a result compulsory maintenance is available for the battery. In normal working state, the direct charge and floating charge are both available, so that the battery life-span is increased. Besides, the adoption of high precision temperature compensation makes the charging more accurate. 4. Parameters Settings with power save functions, system model and control parameters, such as important data are stored in chip internally, power is not lost, that after adjusting system work more convenient and reliable. 5. Adopted the double MOS series circuit control, PWM charge battery voltage loss of loop is using diode recharging circuit reduces nearly half, charging efficiency, increase 3% - 6% than not PWM, with the PWM fuzzy control in charging, the charge efficiency is improved a lot. 6. LED screen shows the working state of charging, discharging and system. Let users understand real-time operating system. 7. Various protections include over-charge, over-discharge and connection-reverse protection, all the protections are harmless to any parts and fuse. TVS thunder proof protection is also available. Non wire jumpers design improves the reliability and durability of the products.   Model   LN-TYCON-BASE-DCxV   Rated charging current     5A     Rated discharging current   5A Rated Voltage    12V/24V   Auto   No load losses   < 7mA   Charging circuit voltage drop   Less than or equal to 0.26V   Discharge circuit voltage drop   Less than or equal to 0.15V   Over voltage protection   17V,   x2/24V   Promote charge voltage   14.6V,   x2/24V (time of duration: 30 minutes)   Direct charge voltage   14.4V,   x2/24V (time of duration: 30 minutes)   Float charge voltage   13.6V,   x2/24V   Charge recover voltage   13.2V,   x2/24V   Over discharge recover voltage   12.5V,   x2/24V   Lower voltage indication   12.0V,   x2/24V   Over discharge voltage   11.1V,   x2/24V   Temperature compensation   -5.0mV/      /2V(boost voltage, direct charge, float charge and charge return voltage compensation)   Control method   PWM Smart Charging   Light controll illumination   10lux(20 seconds)   Working temperature   From -35 to +65   Controller protection   Over-charge, over-discharge, Over-current protection, Solar battery,     Anti-connection-reverse protection for storage batteryand TVS Lightning protection.