Water Purifier for Textile Effluent

Our BWD-01 water decoloring agent is mainly used for water purifer for textile effluent, dyestuff printing and washing wastewater.Specification:Appearance: Transparent sticky liquidViscosity: 50 - 250mPa. S (20º C)Solid content: 50% MINPH 30% solution: 3 - 5Specific gravity: 1.2 - 1.3 (25º C)Advantage:1, Biggest manufacturer and supplier of decoloring polymers in the world2, More than 10 yeasrs experience in production and 15 years experience in water treatment3, Professional technical service team(8 engineers) to help you4, Have reserved sample more than 1 year for quality tracking5, Automatic control during the production, keep quality good and stable.6, General chemical, harmless, no-flammable and non-explosiveApplication range:A) Textile effluentB) Dyeing&Washing wastewaterC) Paper making wastewaterD) Chemical wastewaterE) Other wastewaterUsage:A) Dilutes with 10 - 40 times water and then dosed into the waste water directlyB) PH index of the waste water should be adjusted to 7 - 10 for better resultC) If colority and COD are relatively high, it can be used with the help of Polyaluminum chloride to reduce treatment cost, whether polyaluminum chloride is used before or afterwards depends on the flocculation test and the treatment processStorage:Can be stored at room temperature, within a temperature range of 10 - 30º CPacking:30kg/pail, 250kg/plastic drum and 1250kg IBC tank.Jar test process for BWD-01Water Decoloring Agent:1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.2. Make PAC solution, 1-3% Al2O33. Have solution of anionic Polyelectrolyte, 0.1%.4. Have effluent, test pH value, adjust pH value to 8-9. (It is very important, higher or lower PH, BWD-01 works not well)5. Add PAC solution, mix with effluent completely. About 1-3 minutes6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc.8. Sedimentation9. Check color for treated effluent10. Adjust dosage of BWD-01 and PAC to do more test to have better testing resultBluwat Chemicals is a professional supplier of water treatment chemicals in China. Our core products are coagulants and flocculants for the treatment of water. We are exporting our chemicals to more than 53 countries in the world. We do OEM for Nalco, Kemira, SNF and BASF for years, we hope you are the next./* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1