Kaplan Turbine / Hydro Turbine / Water Turbine for Hydro Power

Created in 1913 by Austrian professor Viktor Kaplan, Kaplan turbines are now popular throughout the world. These turbines are an inward flow reaction turbine, with adjustable propeller blades. They are also a further version of the Francis turbine, having features of both radial and axial turbines for a number of uses. Kaplan turbines are fit for hydro power stations with medium or large capacities and heads. They also function well in stations with relatively unstable power grid loads. Kaplan turbine is a kind of turbine suit to low water head 2-20 meters, and with certain big flow, normally divided into fixed blades and adjustable blades turbine. Main components including: runner, draft cone, water chamber, guide vane, bearing, and main shaft. The spiral case could be steel or concrete. The runner diameter we can manufacture is from 60cm to 4meters, with rated output 50Kw to 20Mw.Turbine units normally be vertical shaft arrangement. Generator equipped with same or different shaft, with Anyway, they will share the same rotating speed. If specially specially required, a speed increase gear could be equipped between turbine and generator in order to smaller the generator size.Kaplan runner Kaplan runner with 3 to 6 blades, fixed blades runner, blades are casted and then welded on the runner hub, and bolts connection with draft cone. Regarding the adjustable blades runner, the hub is designed to be hollow, and a control rod is designed in the shaft middle to change blades angle in order to suit different flow.Runner material: stainless steel, or other specified by the clientKaplan runner has been manufactured by us all this high strength, higher efficiency, and longer service life. The factory tests including static and dynamic balance test, UT test, and dimension measurement. Fuchun's manufacturing provides a lot of choices, namely the Kaplan turbine with adjustable blades, semi-kaplan turbine, bulb turbine, shaft-extended kaplan turbine. We ensure quality and excellence in all turbine models. Well-trained technicians, good factories and past experience all work to ensure that the best possible product is produced. Generally, axial flow type turbines are manufactured ranging from 3 to 45 m in water head, 100 kW to 30 MW in capacity, and 0.8 to 0.6 in runner diameter.Fuchun Industry is the leading manufacturer in small and medium capacity kaplan turbine with adjustable blade in China. We have manufactured Kaplan turbine with adjustable blade as small as 400kW. Gifted with development in both high and low technology levels, we are familiar with solutions for low water head in all cases. If you have high water flow variation but limited budget, we have the experience for cost-efficient solutions. If you want to reduce the labor work as much as possible, we also have the production team for advanced technology. Tell us your project condition and we are more than happy to help you actualize your plan.  /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1