Suncenter Air Operated High Pressure N2 Gas Booster Station

Suncenter Air Operated High Pressure N2 Gas Booster StationSuncenter - Gas booster systems are compact and delicacy solution tailored to customer specific requirements with gas boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet. To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Suncenter - Pneumatic booster system are used for oil free compression of clean shop air as well as industrial gases like Argon, Helium, Oxygen, Hydrogen and Nitrogen,CO2, etc..Driven air from 3 bar to 8 bar (from air compressor). Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option. ApplicationsPressure test with gasGas transfer and filling(Argon/Helium/Hydrogen/Oxygen/Nitrogen/CO2/NO2/CH4/LNG/LPG/CNG/FM200 etc.)Charging of gas cylinder and accumulator with nitrogenSupply for isolating gas systemsGas assisted injection moldingTransfer of oxygen cylindersCharging of breathing air bottlesLeak test Hydrostatic Testing for valves, tanks, pressure vessels, pressure switches, hoses, pipes and tubing, pressure gauges, cylinders, transducers, well casings, BOPs, gas bottles and air craft componentsSafety valve adjustingSuncenter DGS Series Pneumatic (Air driven) Gas Booster Pump SystemDGS booster system = booster pump+ following valves, gages, and partsThe hottest selling- model A and model C cabinet pictureThe standard gas booster pumps system including following parts:Air -driven gas booster pump (DGA/DGD/DGT three series for choosing)Stainless steel (carbon steel) material cabinet (Three models for choosing)F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)Driven air switch (Pump starting switch), driven air pressure gaugeGas inlet switch, Gas inlet pressure gaugeGas outlet switch, Gas outlet pressure gauge,  unloading valve, interconnecting pipes etc.And we could also customize it according to clients' special requirement.Technical specification for DGS-DGA seriesModelPressure boost ratioMin. gasInlet pressurePA (bar)Max.gasInlet pressurePA (bar)Max. gasoutlet pressure PB (bar)Driven air pressure  PLFormula tocalculate gas outlet pressure PBConnection:Gas Inlet /Gas outlet (ZG thread)Max. flow at driven air pressure of 6bar (L/min)DGS-DGA022:11.016162-8 bar2X PL1/2 / 1/2960 (at PA of 6 bar )DGS-DGA055:104040 2-8 bar5XPL1/2 / 1/2680(at PA of 6 bar )DGS-DGA1010:13.580802-8 bar10XPL3/8/ 3/8210(at PA of 10 bar )DGS-DGA2525:17.0 200200 2-8 bar25XPL1/4/ 1/4120(at PA of 20 bar )DGS-DGA4040:1103203202-8 bar40XPL1/4/ 1/4200(at PA of 40 bar )DGS-DGA6060:120 480480 2-8 bar60XPL1/4/ 1/4180(at PA of 40 bar )DGS-DGA100100:1258008002-8 bar100XPL1/4/ M14X1.5136(at PA of 40 bar )DGS-DGA130130:13580010402-8 bar130XPL1/4/ M14X1.5120(at PA of 40 bar )Note:  PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure  In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 bar Technical specification for DGS-DGD series  ModelPressure boost ratioMin. gasInlet pressurePA (bar)Max.gasInlet pressurePA (bar)Max. gasoutlet pressure PB (bar)Driven air pressure  PLFormula tocalculate gas outlet pressure PBConnection:Gas Inlet /Gas outlet (ZG thread)Max. flow at driven air pressure of 6bar (L/min)DGS-DGD1010:13.58080 2-8 bar10XPL+ PA3/8/3/8410(at PA of 6 bar )DGS-DGD2525:110 200200 2-8 bar25XPL+ PA1/4/1/4396(at PA of 20 bar )DGS-DGD4040:115 320320 2-8 bar40XPL+ PA1/4/1/4320(at PA of 40 bar )DGS-DGD6060:125 480480 2-8 bar60XPL+ PA1/4/1/4215(at PA of 40 bar )DGS-DGD100100:135 800800 2-8 bar100XPL+ PA1/4/M14*1.5300(at PA of 60 bar )Note:  PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure  In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 barTechnical specification for DGS-DGT seriesModelPressure boost ratioMin. gasInlet pressurePA (bar)Max.gasInlet pressurePA (bar)Max. gasoutlet pressure PB (bar)Driven air pressure  PLFormula tocalculate gas outlet pressure PBConnection:Gas Inlet /Gas outlet (ZG thread)Max. flow at driven air pressure of 6bar (L/min)DGS-DGT2525:10.1102002-8 bar25XPL+3.5XPA1/4/ 1/4136(at PA of 8 bar )DGS-DGT4040:10.1103202-8 bar40XPL+ 6XPA1/4/1/4124(at PA of 8 bar ) DGS-DGT10/6010:1/60:10.1104802-8 bar60XPL+6X PA1/4/1/484(at PA of 8 bar )DGS-DGT25/6025:1/60:110254802-8 bar60XPL+2.5XPA1/4/1/480(at PA of 15 bar )DGS-DGT100100:10.1108002-8 bar100XPL+10XPA1/4/ M14*1.563(at PA of 8 bar )Note:  PL: driven air pressure   PA: gas inlet pressure   PB: gas outlet pressure  In order to extend the lifetime of the pump, the driven air pressure should not be higher than 8 barHow to Select Suncenter Air Driven Gas Boosters/Sy