Umc 740u Gearbox for Zimmatic and Reinke Center Pivot

UMC® is the industry leader in gearbox technology. Over our 40 year history we have introduced many industry changing gearboxes such as the patented TNT gearbox, the 740, the 760, the 775 and more. We continue to define and redefine industry standards for gearbox performance, quality, features and technology. Our gearboxes are purpose built to do the job. Never over-engineered.UMC® stands behind its products and is committed to manufacturing the best products for a global market.740-U 50:1 RatioDesigned for longer spans, larger wheels, and heavier towers.  Features and Benefits2.25 inch output shaft50:1 gear ratioCartridge input and output sealsLarger input bearingsInput shaft guardExternal seal protectors for input and output sealsTop oil fill plugUniversal mounting patternFull cycle expansion chamber with stainless steel coverFilled with extreme pressure worm gear oilSteel output shaft and input shaftTapered roller bearingsIncludes carriage bolts and nutsDual ended input shaft740-UV 52:1 RatioDesigned for longer spans, larger wheels and heavier towers where an extended output shaft is required. This gearbox has all the same capabilities, features and benefits that the standard 740 has with a few tweaks. The output shaft is extended, the gear ratio is 52:1 and the input shaft is made of ductile iron with a 25° pressure angle allowing this gearbox to be used on center pivot and lateral move/ linear systems that come standard with these specifications.Features and Benefits2.25 inch extended output shaft52:1 gear ratio with 25° pressure angleCartridge input and output sealsLarger input bearingsInput shaft guardExternal seal protectors for input and output sealsTop oil fill plugUniversal mounting patternFull cycle expansion chamber with stainless steel coverFilled with extreme pressure worm gear oilSteel output shaft and ductile iron input shaftTapered roller bearingsIncludes carriage bolts and nutsDual ended input shaft  760-UV Gearbox Designed for corner systems and lateral move carts where an extended output shaft is required   Growers typically use UMC's 760-UV gearbox for the most extreme applications where an extended output shaft is required. The gearbox is designed for higher annual hours of operation while handling the heavy loads experienced on corner systems and lateral move carts as well as the most extreme field conditions where wheel rutting is prominent, soil is heavy, and tower weights are higher.   The UMC® 760-UV final drive gearbox is our largest and most durable gearbox with an extended output shaft. It features a larger-diameter bull gear than the standard 740 series to handle 20% higher torque. It also features a 2.5″ output shaft to accommodate more overhung load. It is designed for use on center pivots, corners, lateral move/ linear irrigation systems and carts where a 52:1 gear ratio and extended output shaft are standard specifications. Features and Benefits2.5″ output shaft52:1 gear ratio with a 25° pressure angleUnique dual input and output seal design20% more torque capacity than the standard 740Bronze gear optionalLarger input bearingsInput shaft guardExternal seal protectors for input and output seals11-Bolt mounting patternFull cycle expansion chamber with aluminum coverFilled with extreme pressure worm gear oilSteel output shaft and ductile iron input shaftTapered roller bearingsIncludes carriage bolts and nutsDual ended input shaftTNT-2 GearboxDesigned for applications where the irrigation system may need to be towed  This gearbox is the perfect solution for a towable irrigation system. Growers typically prefer this gearbox over a gearbox with a towable hub. Simply disengage the worm and tow your system to its working location, then re-engage the worm and you are ready to run. The CX coupler is the perfect compliment for the TNT-2 gearbox due to the ability to control coupler disengagement at the gearbox.  The UMC® patented TNT-2 final drive gearbox is designed specifically for applications where a center pivot or lateral move/ linear irrigation system needs to be towed. The gearbox provides the ability to disengage the worm gear and allows users to move systems from one area to another without requiring a Towable Hub add on.Features and Benefits2.25″ output shaft50:1 gear ratioDual input seals with triple lip output sealsBronze gear optionalInput shaft guardExternal seal protectors for input and output sealsTop oil fill plug11-Bolt mounting patternFull cycle expansion chamber with stainless steel coverFilled with extreme pressure worm gear oilSteel output shaft and input shaftTapered roller bearingsIncludes carriage bolts and nutsDual ended input shaft   760-UV Bronze GearboxDesigned for the most extreme conditions where an extended output shaft is required.  Growers typically use The UMC® 760-UV bronze gearbox for the most extreme applications where an extended output shaft is required. The gearbox is designed for higher annual hours of operation while handling the heavy l