2023 China Customized Telecom Cabinets Use Counterflow Plate Heat Exchanger

Our companyProduct description of Counterflow Plate Heat Exchanger:Air to air  Counterflow Plate Heat Exchanger Introduction:Air to air plate heat exchanger IntroductionThe heat exchanger core is the major part of air to air ventilation system.When the air is forced to pass through the heatexchanger core from two different air channels,the energy and humidity are transfered by the plates,so as to save the energy.Outdoor air and exhaust air is separated by thermal conduction plate,avoid cross-contamination,make sure clean outdoor air.Base on different air channel,they can be divided into cross flow,counter flow and cross&counter flow;base on material can bedivided into sensible and enthalpy heat exchanger core.Heat exchanger core have compact structure,no running parts,strong reliability and long service life.  ERA Cross Flow Heat Exchanger CoreCross flow heat exchanger core is made of antiseptic hydrophilic / epoxy coating aluminum foil and galvanized sheet cover. The airis forced to crossover through the heat exchanger core, two airstreams never come into direct contact, avoid the transfer of anysmell and moisture. It is usually being used for recovering energy at residential, commercial and wind power industry ventilationsystems.  ERB Counter Flow Heat Exchanger Core.Counter flow heat exchanger core is made of antiseptic hydrophilic / epoxy coating aluminum foil and galvanized sheet cover. Theair is forced to counter through the heat exchanger core, two airstreams never come into direct contact, avoid the transfer of anysmell and moisture. It is usually being used for recovering energy at industry ventilation system, such as: base station / outdoorcabinet ventilator and so on.  ERD Cross&Counter Flow Heat Exchanger CoreCross & counter flow heat exchanger core is made of antiseptic hydrophilic / epoxy coating aluminum foil and galvanized sheetcover. A part of air is cross flow, and the other is counter flow,two airstreams never come into direct contact, avoid thetransfer of any smell and moisture. It is usually being used for recovering energy at residential household, commercial andindustry ventilation systems.ERC Enthalpy Heat Exchanger CoreHeat exchanger core is made of fireproof and antibacterial fibrous paper and ABS framework, the air is forced to crossover throughthe heat exchanger core, two airstreams never come into direct contact, avoid the transfer of any smell and moisture. It isusually being used for residential ventilation system, in order to recover the energy and moisture.Material of sensible heat exchanger:The sensible heat exchanger core is made of high quality hydrophilic coating aluminium foil, with fast thermal conductivity, nosecondary pollution and high heat transfer rate. According to different occasion, the epoxy coating aluminium foil is able tochoose from, which with higher corrosion resistance. The thickness of aluminium foil is from0.1mm ~ 0.3mm.·Material of total heat exchanger:The total heat exchanger core (paper core) is made of fireproof and antibacterial fibrous paper, which have high moisturepermeability, good airtightness, antirends, aging resistance, anti-mildew features, the framework is made of ABS material, whichis not easy to break, long service life and good impermeability. The heat exchanger core not only transfer energy but alsomoisture, avoid air cross-contamination, in order to achieve high efficiency.Types(co2)(NH3)(CH3)(H2O)Fiber clearanceMolecular Diameter0.3240.3080.3240.2880.3(reference value)Plate type sensible heat exchanger:Application EnvironmentAIR-ERV air to air heat exchanger core are widely used for different industry air exchanger, heat recovery, cooling or heating and dehumidification. Such as in HVAC, Telecom, Power Supply, Textile Industry, Automobile, Food Industry, Agriculture, Animal husbandry, Tobacco barn, Drying industry, Welding industry, Boiler Industry and so on. FeatureAdopt antiseptic hydrophilic aluminium foil, resistant to corrosion, with long service life. Apply to special occasions of epoxy resin aluminum foil, corrosion resistance stronger. Many size hrat exchanger core ( plate distance 2.5 ~ 10mm ) for your choice. Module structure, any sine can be praided, no running components, low maintenance cost. Compact struxture, small volume, suitable for various occasions. ·Production TechnologyThe surface of heat exchanger core was processed with spiral wave heat transfer enhancement techniques, increased the 10% heat transfer area. Convex and concave air channel, ensure the strength and tightness of heat exchanger core, could bear high pressure. Cross air channel, double folding process of the face side edges,which is equal to 5 times material thickness, ensure the high intensity and tightness. All joints are airproofed by airproof glue, ensured that the heat exchanger has excellent air tightness. Plate type full heat exchanger: Feature-Made of special fibrous paper, with high moisture permeability, good airtightness, antirends, agin