Oil Distillation Machine Recycling Crude Oil Sludge

1.Waste Engine Oil Recycling New Distillation Plant To Diesel Work Flow1) Pumping the feedstock into the sedimentation tank 1# and 2#, adding some catalyst, injecting the air by compressor into the sedimentation tanks for making the feedstock and catalyst mixed well, sedimentation quietly for 5hours. 2) After sedimentation, discharging the sediment, pumping the feedstock after sedimentation into distillation kettle. 3) Starting the high-temp circulated oil pump for distillation and the heating furnace, the feedstock will be heated during distillation kettle and furnace, when they reach the distillation cuts temp, through the rectifying tower into the oil-gas cyclone sedimentation tank for separating the ash, then into the oil-gas condenser and getting the diesel and gasoline separately stored. 4) The part of non-condensable gas into the vacuum buffering tank, vacuum pump, water seal, back fire device and into the heating furnace for supplying heat. 5) When there is "low" alarming on the liquid level, it should start to pump the feedstock (after sedimentation in tank 1# and 2#) into the distillation kettle, the whole distillation process is continuous. 6) When there is no alarming on the liquid level, but the diesel color is very dark, it shows there is much more residual oil in the distillation kettle and should discharge, then put into the residual oil tank. 1) Pumping the feedstock into the sedimentation tank 1# and 2#, adding some catalyst, injecting the air by compressor into the sedimentation tanks for making the feedstock and catalyst mixed well, sedimentation quietly for 5hours. 2) After sedimentation, discharging the sediment, pumping the feedstock after sedimentation into distillation kettle. 3) Starting the high-temp circulated oil pump for distillation and the heating furnace, the feedstock will be heated during distillation kettle and furnace, when they reach the distillation cuts temp, through the rectifying tower into the oil-gas cyclone sedimentation tank for separating the ash, then into the oil-gas condenser and getting the diesel and gasoline separately stored. 4) The part of non-condensable gas into the vacuum buffering tank, vacuum pump, water seal, back fire device and into the heating furnace for supplying heat. 5) When there is "low" alarming on the liquid level, it should start to pump the feedstock (after sedimentation in tank 1# and 2#) into the distillation kettle, the whole distillation process is continuous. 6) When there is no alarming on the liquid level, but the diesel color is very dark, it shows there is much more residual oil in the distillation kettle and should discharge, then put into the residual oil tank. 1) Pumping the feedstock into the sedimentation tank 1# and 2#, adding some catalyst, injecting the air by compressor into the sedimentation tanks for making the feedstock and catalyst mixed well, sedimentation quietly for 5hours. 2) After sedimentation, discharging the sediment, pumping the feedstock after sedimentation into distillation kettle. 3) Starting the high-temp circulated oil pump for distillation and the heating furnace, the feedstock will be heated during distillation kettle and furnace, when they reach the distillation cuts temp, through the rectifying tower into the oil-gas cyclone sedimentation tank for separating the ash, then into the oil-gas condenser and getting the diesel and gasoline separately stored. 4) The part of non-condensable gas into the vacuum buffering tank, vacuum pump, water seal, back fire device and into the heating furnace for supplying heat. 5) When there is "low" alarming on the liquid level, it should start to pump the feedstock (after sedimentation in tank 1# and 2#) into the distillation kettle, the whole distillation process is continuous. 6) When there is no alarming on the liquid level, but the diesel color is very dark, it shows there is much more residual oil in the distillation kettle and should discharge, then put into the residual oil tank. 2.Specification  Machine typeEnvironmental friendlyDaily capacity15TonReactor size (D*L)2.2*4.5mWorking pressurenormalWorking Tem0-500ºCMachine weight35000kgsVoltage380vPower18kwReactor working wayNon-rotateWorking round area600 square metersLabours required1Reactor materialQ345R/stainless steelDedust systemHigh-classUsed forWaste engine oil/waste lube/fuel oilOut putBase oil/dieselOil rate70-85%Feeding wayAuto and non-stopOil cooling wayWater coolingWater consumption500-1000kgsHeating waydirect /indirect wayHeating fuelWool.coal,gas,oil  ModelReactor materialCapacityContainerXHZL-05316L stainless steel3-5tons2*40HQXHZL-10316L stainless steel6-10tons2*40HQXHZL-15316L stainless steel10-15tons2*40HQXHZL-20316L stainless steel15-20tons3*40HQXHZL-25316L stainless steel20-25tons3*40HQXHZL-30316L stainless steel25-30tons4*40HQ3.Major partsa.Reactor b.Catalyst tower c.Heat exchanger d.Pipe condenser e.condenser f. filter g. Pipe combination cooling pool h. Light component oil collection t