Silicone Rubber Insulated Sheild Cable for Electric Vehicle

Conductor: annealed bare copper class 5 IEC60228                               Insulator: silicone rubber      Shielding Layer: Tinned copper with Al foil tape wrappedJacket: Silicone rubber                                                      Covering: PET braiding with silicone resin coating   Rated temp: 150/180ºCRated volt: AC600V/ DC900VTest Voltage: 5000V. 5MinFlame test: FT 2  Mechanical properties:    Tensile strength:≥8N/mm²   Elongation at break of insulation: ≥250%    Min.Bending radius: 6×OD  Standard: LV112, LV216, ISO6722Characteristics:Silicone rubber wire & cable have very good flexibility and good performance of resistance to high temperature, range from -55ºC up to 180ºC.The use of silicone rubber, a high grade corona resistant insulation material, gives the cable excellent dielectric strength.  The braided synthetic yarn covering, which is applied directly over the insulation, gives the cable, because of its short braiding pitch and high compactness, an excellent mechnical protection by maintaining good flexibility.   The varnishing of the braiding results in good antifriction properties, high abrasion resistance and excellent chemical resistance against transformer oil, light fuel oil and most types of cleaning agents.In the event of fire, no corrosive and toxic gases will be given off. Hence, damage caused by fire can be kept to minimum.  Application: It's mainly used for connection cable between battery to engine motor within electric vehicle, hybird auto,etc.            /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1