China Supplier 12-24 Fiber Optic Joint Splice Closure

China Supplier 12-24 Fiber Optic Joint Splice ClosureDescription 1. Mechanical seal: Excellent seal performance, reusable. Protection grade is IP68. 2. Installation method: Wall-mounted, pole-mounting, manhole 3. L× W× H: 280× 200× 90MM 4. Cable ports: 2-4 ports 5. Cable Diameter: Max φ 14 6. Max. Capacity (bunchy fiber): 96 7. Core capacity per tray: 12 or 24 Characteristic 1. Easy to re-enter Cable entry/exit ports 2. Pressure testing valve and earth deriving device 3. Intergrated seal, air tight and water proof Ideal for cable repair 4. RoHS compliant Can be used in through, branch or mid span splice locations 5. Suitable for aerial, underground duct or direct burial applications    ItemParameters  1                                  L×W×H  280×200×90MM2Cable ports2-4 ports3 Cable DiameterMax φ144Max.Capacity (bunchy fiber)     965  Core capacity per tray  12 or 24 Holds up to 96 fibers6 Box materialModified polymer plastic 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.   The scope of application is: aerial and wall-mounting. The ambient temperature ranges from -40 to 65ºC.   2. Basic structure and configuration  2.1 Dimension and capacity Outside dimension (LxWxH)280x200x90 (mm)Weight (excluding outside box)1200g-1500gNumber of inlet/outlet portsmax. 4 piecesDiameter of fiber cableΦ8-Φ14 (mm)Capacity of FOSCBunchy: 6-96 (Cores)  2.2 Main components No.Name of componentsQuantityUsageRemarks1FOSC cover1 pieceProtecting fiber cable splices in wholeInternal diameter:205x146 (mm)2FOSC bottom1 pieceFixing reinforced core, fiber cable and FOSTInternal diameter:205x146 (mm)3Fiber optic splice tray(FOST)max. 4 pieces (bunchy)Fixing heat shrinkable protective sleeve and holding fibersSuitable for:Bunchy:6,12,24(cores) 4Integrated seal fitting1 setSealing between FOSC cover and FOSC bottom 5Port plug2 piecesSealing empty ports 6Earthing deriving device1 setDeriving metallic components of fiber cable in FOSC for earthing connection.Configuation as per requirement.    2.3 Main accessories and special tools No.Name of accessoriesQuantityUsageRemarks1Heat shrinkable protective sleeve Protecting fiber splicesConfiguration as per capacity2Nylon tie Fixing fiber with protective coatConfiguration as per capacity3Seal tape1 rollEnlarging diameter of fiber  cable which fits in with seal fittingConfiguration as per specification4Hanging hook1 setFor aerial useConfiguration as per requirement5Fixing device1 set Configuration as per requirement6Earthing wire1 piecePutting through between earthing devicesTo put through while required7Abrasive cloth1 pieceScratching fiber cable 8Labeling paper1 pieceLabeling fiber 9Special wrench1 pieceFixing octagonal nut (plastic) 10Buffer tube To be decided by customersHitched to fibers and fixed with FOST, managing bufferConfiguration as per requirement11Desiccant1 bagPut into FOSC before sealing for desiccanting air.     3.  Necessary tools for installation 3.1 Supplementary materials (to be provided by operator) Name of materialsUsageScotch tapeLabeling, temporarily fixingEthyl alcoholCleaningGauzeCleaning  3.2 Special tools (to be provided by operator) Name of toolsUsageFiber cutterCutting off fibersFiber stripperStrip off protective coat of fiber cable Combo toolsAssembling FOSC  3.3 Universal tools (to be provided by operator) Name of toolsUsage and specificationBand tapeMeasuring fiber cablePipe cutterCutting fiber cableElectrical cutterTake off protective coat of fiber cableCombination pliersCutting off reinforced coreScrewdriverCrossing/Paralleling screwdriverScissor Waterproof coverWaterproof, dustproofMetal wrenchTightening nut of reinforced core  3.4  Splicing and testing instruments (to be provided by operator) Name of instrumentsUsage and specificationFusion Splicing MachineFiber splicingOT DRSplicing testingProvisional splicing toolsProvisional testing  Notice: The above-mentioned tools and testing instruments should be provided by the operators themselves.   4.  Installation flow chart   The process of installing FOSC Step One - Open the closure  Cleaning the locale and determine where to install the FOSC and then place  Check whether the main components and accessories have been well prepared  inside the package. Open the closure by demounting the fixing bolt (5 pieces) of the housing, then succeed in opening the closure.   See Drawing 1 Important issues: If the weather condition is not good enough, then a tent must be pitched for waterproof and dustproof.   5.2  Step Two -Determine length of fiber cable to be fixed and stripped inside FOSC 5.2.1   . Fiber cable in 70mm length: the distance from seal fitting to fiber cable pressboard . Fiber cable in 1720mm length: it is used to be winded and spliced after stripping.     . Fiber with protective coat in 120mm length: the distance from the fixing point of fiber cable to the fixing point of FOST (fiber optic splice