FTTA Armored (remote) Fiber Optical Cable Auto-Cutting/Winding Machine

Basic Info.Model NO.AFN-18CTypeOptical Fiber Cable Auto-Cutting MachineWiring DevicesCable Cutting MachineCertificationCE, RoHSConditionNewTrademarkTechTideTransport PackageWooden BoxSpecificationPower: 500W 220 VAC 50/60HzOriginChinaHS Code8451500000Product Description                                           AFN-18C  Outdoor/Armoured Fiber Optical Cable Auto-Cutting and Winding Machine FunctionThe machine  consists of three separate units,a cable pay-off units, a cable cutting unit and a cable take up unit.Suitable for outdoor or  armoured fiber optical cable cutting, coiling and winding. The machine also contains a shorter conventional indoor cable cutting functionPerformance01.Active tension pay-off  unit,feed speed is controlled by the synchronous mechanism of the cable cutting unit.         During feeding, tensile force on the cable is no more than the maximum allowable tension.02.High Length Accuracy: Meter Wheel to count length, no length deviation from cable twist, slip during feeding.03.High Efficiency:Max feed speed is 3m/s, Less than 25 seconds for remote cable typical length 50m.04.Easy Operation:  Adopt holds operation interface with the humanized touch screen,Opertator can set  parameter visually such as length , quatity, speed, etc.05.Stable Performance: Robust mechanical structure and intellectual controller for super reliable movement.06.PLC+Touch screen Control: Intellectual software to control and monitor operation07.The pitch and range of traversing can be adjustable. it is coordinated action with take-up speed.Specification :Power: 500W 220 VAC 50/60HzFeed Speed: 0-3.0m/s(adjustable speed)Length Accuracy: 0.3%Cable pay-off  bobbin: Max Φ900 L 590Cable take-up coil outer diameter Max Φ600Cable Specification: Φ0.9 to Φ8.5mmCable type:Jacket fiber, UTP, CAT6, Armored cable, FTTH cable Remote cableN.W: 250Kg