Offline UPS Power System

Basic Info.Model NO.BUPhaseSingle PhaseTypeLine InteractiveProtectionOvervoltageApplicationCommunicationClassificationLighting/PowerStandby TimeSmallStandby UPSOffline UPSOutput CapacitySmall TypeEquipment ModeCentralized ModelBrandInvtOutput Voltage220V or 110VACInput Voltage110/120VAC or 220/230/240VACInput Frequency50/60Hz(Auto Sensing)Wave FormPWM (DC Mode)Capacity of Batte12V,7.5ah*2TrademarkINVTTransport PackageStandard Invt PackingSpecification400-1200vaOriginChinaHS Code85044020Product Description Offline UPS 400-1200VABoost and buck voltageSpike, surge, RFI noise protectedAdvanced PWM mosfet technologyAdvanced power failure detectionAdvanced shutdown for overload and low batteryUPS Auto on when AC back.MODELBU400VABU500VABU650VABU750VABU800VABU1000VABU1200VACAPACITYVA/W240W300W390W450W480W600W720WInputVoltage110Vac/220Vac/230Vac/240VacVoltage range75-145v OR 145-280VFrequency50Hz/60HzOutputFrequency50Hz /60Hz Voltage110Vac/220Vac/230Vac/240VacTransfer time< 10ms including direction timeWave formSine wave under mains supply, square wave under battery operationBatteryBAttery Type and Number12v4.5ah*1pc12v7ah*1pc12v9ah*1pc12v7ah*2pcs12v9ah*2pcs Backup Time(at a pc load with 17" monitor)5-7 minutes8-15 minutes15-28minutes25-40minutes30-50 minutes Recharge Time10 hoursTransfer Timetypical< 10MSIndicatorAC MODE  The 1st green LED lightingBattery MODEThe 2nd red LED flashingFaultRed led lightingAudible AlarmBattery ModeSounding everey 4 secondsLow batterySounding everey  secondsOverloadups offPROTECTIONOverloadAs load over 130%, UPS is protected in 3 secondsAC inputFuse for overload & short circuit protectionShort circuitUPS output cut off immediatelyBatteryTypeSealed, lead acid maintenance-free protectionAuto-inspection, discharge protection and battery fault cautionBattery Normally battery is charged once every three months, it isn' t less than 6 hours once a time.PhysicalWeight(kg)4.7566.57.581112Size (LxWxH)mm275*90*138                335*103*152345x122x190Note: Product upgradation is a continuous process; hence specifications are subject to change without notice.