Small Kitchen Appliance Thermostat (Kain-191)

Basic Info.Model NO.KI-31SizeMiniatureMax Voltage250VMax Current15AContact TypeNormal Close or Normal OpenThermostat TypeAuto Reset or Manual ResetCleanerHigh Current Batter PacksTerminalHorizontalBreaking CapacityHigh Voltage Circuit BreakersOperationElectric TypeInstallationFixedTrademarkKAINSpecificationcurstomizedOriginChinaProduct Description Detailed Product DescriptionFixation of the working temperaturing Reliable snap action Perdurable Less radio interference Technical parameters: Electrical parameters: 1)CQC, VDE, UL, cUL AC250V 50~60Hz 5A/10A/15A (Resistance load)2)UL AC125V 50Hz 15A (Resistance load)2. Action temperature range: 45~160 (Optional); Temperature accuracy: ± 2 ± 3 ± 5 ± 103. Recovery and action temperature difference: 8~100 (Optional)4. Connection method: Insert the terminal 250# (bending angle: 0~90deg optional); Insert the terminal 187# (bending angle: 0~90deg optional; Thickness: 0.5, 0.8mm optional)5. Lifespan: Over100, 000 times6. Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V7. Contact resistance: Less than 50MΩ8. Insulation resistance: Less than100MΩJunction method: Constant-closed: The contact point disconnects when temperature rises; And contact point connects when temperature falls; Constant-opened: The contact point connects when temperature rises; And contact point disconnects when temperature falls. 10. Casing protective class: IP0011. Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device. 12. Installation method: Installed for KI031 series: General moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole Structure and application: KI-32 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; The contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; Open/close the contact point; Disconnect/connect the circuit; Thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state. Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat. Characteristics: Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radioPrecautions: 1. When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor. 2. For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation. 3. Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited. 4. When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0.5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection; 5. The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40. Passed certifications: CQC UL VDE TUV SGS!