Ecdrive Power Drive Automatic Door Dunkermotoren European Standard

EC drive  ECdrive EC drive sliding door operator design for repair all European brand automatic doors multipurpose automatic door all -purpose automatic door system Automatic Door Operator Sliding Door Operator with Brush Motor automatic door with Dunker Motor GEZEFeature 1...Function 95% similar as GEZE and works with original GEZE 2. Brush Motor or Dunker Motor 99.5W, powerful enough to bear 2X160KG gates. 3. Easy install since the Drive system has been installed before leavine the factory 4. Germany Dunkermotor, CE approved Standard Configuration 1. Minidrive Unit 2. Transformer 3. Motor 4. Decoder 5. Basic control module 6. Track 7. Carrier 8. Return Pully 9. Service cover holder 10. End stop 11. Door bracket 12. Belt connection 13. Belt tensioning device Opetional Parts Motion Sensor Lock latch Battery Beam safety photocell Specification EC DRIVE Weight of gate Single/Bi-part1X200KG/2X120KG Width of gate Single/Bi-part900-6100MM Master Controller32 digital microprocessor Brush motor/Dunker motor99.5W 60VDC 2A IP50 Opening speed300-700mm/s Closeing speed300-650mm/s Max open strength150N Hold Open Time/Lock0-10S/30s Height of the rail8CM Deepth of the rail16CM Power SupplyAC110V-250V 50/60Hz Temp15 C to +70 C Power Consumptionaround 100W Protection degree of ElectronicIP23 Function Programs Off Automatic Permanent Open Partial Exit only -------------------------------------------------------------------------------------------------------------------------------------------- Additional Low noise desigh (