China Composite Boards for Decking Sheets Outdoor WPC Decking

                           Co-Extrusion Composite Decking Colour  Descriptionoutdoor wpc decking made in chinaBrandEverJadeMaterialWood Plastic CompositeSize (Width x Thickness)40-200mm x 10-60mmLength2.2m,2.9m,5.6mor customizedApplicationOutdoor decking floor,wall panel.railing,fence,bridge,dock,gloriette,gazebo,boardwalk,etcOther Available SizesMore sizes are available, please contact us for detailsCertificateISO9001,ISO14001,CE,SGSWarranty15 years                                 wpc decking outdoor wood plastic                                           composite  decking                                               EverJade WPC Decking Maintenance  Mold & MildewIf debris such as pollen and dirt is allowed to remain on the deck surface , mold can feed on the bio film. Using a hose and warm soapy water with a soft bristle brush is recommend to remove the food source and mold.Oil/ Grease/ FoodOne way: All food spills should be removed as soon as possible. The surface must be cleaned within seven days to maintain the stain warranty. To remove, spray off with a hose and use warm, soapy water and a soft bristle brush to remove spills from embossing pattern.Another way for oil: The clear lacquer is some kind of oil paint, normally it is used for painting the wood furniture and it is transparent paint. It is a very common paint which is widely used in wood furniture plants. After painting such kind of transparent paint, thedecking boards could be refurbished.ScratchSlight scratch didn't matter a lot to the appearance of decking. A light metal brush or medium sanding paper can be used if you insisted on removing such scratch.General Dirt & DebrisThe affected area should be sprayed off with a hose to remove surface debris. Use warm soapy water and a soft bristle brush to remove dirt and debris from the embossing patternMold & MildewIf debris such as pollen and dirt is allowed to remain on the deck surface , mold can feed on the bio film. Using a hose and warm soapy water with a soft bristle brush is recommend to remove the food source and mold.Ice & SnowA plastic shovel may be used to remove snow from the deck. Use Calcium, chloride or rock salt to melt the snow and ice from the deck surface.BrokenIf replace the broken decking, you need to break the clips of both sides of the broken decking and then take the broken decking out, it's easy.MaintenanceAll exterior building materials require cleaning. Periodic cleaning will maintain the beauty of the deck. However, EverJade decking requires little maintenance. We recommend you to wash your deck once a year (in spring or summer) with water and soap ( a scrub brush if possible to act in the longitudinal sense of the boards). It's recommended to use a blade to clean the space between each board to keep a good drainage and ventilation.                                               wpc co-extrusion decking                                     Durable co-extrusion wpc hollow decking                                         Production Process                         WPC board has the following advantages:* Less maintenance. Compared with real wood, is more simple, no need for dyeing or painting. Usually clean with soapy water and a soft brush.* Long service life. Waterproof, will not attract ants and decay, not easy bending deformation.* Stay beautiful. Our WPC board remains as new in many years, only the color becomes slightly lighter in the earlier 3 or 6 months, they will be very stable, no color fading anymore.* Environmental friendly. 90% of our raw material is recycled, reduce resource waste and environmental pollution.* Strong applicability. Cutting or drilling. Applies to patios, pools, hotels, gardens and various places.                        We will test the wpc decking quality before                                                  shipment for each order                                                                                     Our WPC Products Range                                  Our Client Comments on WPC Decking                    Certificate Of wpc decking co-extrusion                                                                                 Attended Fair                                                             Our Company Show                   EverJade Group Limited is one of the professional wpc decking manufacturer in China, which specializing in manufacturing and marketing of wpc decking, wpc tiles, plastic pedestal etc.,EverJade focus on wpc decking and wpc related products for 13+ years, with ISO9001, ISO14001,CE, CO, INTERTEK, SGS certifications etc, We provide you high quality products and good service.EverJade has a well team-conscious, the ability of communication and coordination, work hard, meticulous and patience can afford the pressure of the work. We are young, passionate, fun, experienced, helpful, when doing business with us, there is nothing you cannot rest assured.Currently we have major customers from all over the worl