Mixer and Homogenizer Cosmetic Cream

Mixer and Homogenizer Cosmetic CreamProduction of each machine in below  Semi-automatic production line, Water treatment → EDI,ultraviolet(alternative)→ water tank → Ozone generator,pump(alternative) → homogenizer emulsifier → material tank → semi-automatic filling machine → semi-automatic capping machine → semi-automatic labeling machine → ink printer → conveyor(alternative)Fully automatic production line, Water treatment → EDI,ultraviolet(alternative) → water tank → Ozone generator,pump(alternative) → homogenizer emulsifier → material tank → automatic filling and capping machine → automatic labeling machine → ink printerStainless steel cream mixing tanks cosmesitcs making machine cosmetics homogenizer mixer Stainless steel cream mixing tanks cosmesitcs making machine cosmetics homogenizer mixer Mixing is an important part of pharmaceutical production. Operations can include dissolving solids and powders, preparing emulsions, combining raw materials, enabling chemical reactions, and milling active pharmaceutical ingredients (APIs), to name a few. Efficiency and accuracy are key when in the mixing process to ensure dosage accuracy, stability, appearance, and texture. Therefore, selecting the proper type of mixer for the right application is an important part of the instrumentation process.   Hydraulic Lifting and Tilting System are used for material discharge and cleaning, easy and convenient operationElectric Cabinet SUS304 control panel: button / PLC touch screen (option) Ampere meter, Voltmeter Real-time Temperature display Mixing system control (frequency control) Vacuum system control Hydraulic lifting system controlWater and Oil Pot Machine equipped A set of water and oil pot Water pot capacity: 10-5000l, Oil pot capacity: 10-5000l Power: 0.37-22kw, Siemens motor,  Speed: 1440RPM Electric heating by Water or Conduction Oil Mixing: High shearing DISPERSER plates with baffle on wall Half open hinged lid for easy operationFrame Wall Scrapper Mixer SUS316L Wall scrapper mixerPTFE scraper Fixed propeller, 45degree blades on opposite angles to make sure mixture complete Siemens motor drive, 0-65rpm with variable speed controlTWO WAYS wall scrapper mixer HELIX scrape mixer(OPTION)Lid Parts Material suction inletVacuum presssure gauge Vacuum port, Vent filter Positive pressure inlet Perfume hopper CIP spray ball, LED Light Sight windowWhy the tank with homogenizer is best ?(AIK homogenizer) Emulsification is the process of mixing two liquids that are difficult to mix. The main purpose of emulsification is to disperse the discontinuous phase into smaller droplets. The rotor-stator device is particularly suitable for emulsification tasks. The combined action of high shearing force and high expansion force in the mixing head makes the droplets small. In addition, the large turbulence enables the rotor-stator device to help transport emulsifier molecules quickly to the reformed surface.Lifting vacuum emulsifier The lifting external circulation vacuum emulsifier is specially designed by Planck for the production of products with high viscosity and high emulsification requirements in the cosmetics and pharmaceutical industries. Its biggest features are: 1. The material can be continuously emulsified in circulation; 2. Emulsify materials with high viscosity more thoroughly, without dead ends; 3. The external circulation emulsifier can replace the conveying pump for discharging, and can be cyclically cleaned. The mixing adopts forward and reverse double scraping side mixing, with high-speed external circulation emulsifying head design.Working principle: After the materials are mixed and reacted by heating and stirring in the water pot and oil pot, they are sucked into the emulsifying pot by the vacuum pump, and stirred through the center of the upper part of the emulsifying pot. , So that the captured materials continuously produce new interfaces, and then through the cutting, compression, and folding of blades and rotating blades, they are stirred and mixed and flow down to the homogenizer below the pot body, and the materials are cut by high-speed rotation During the process of strong shearing, impact, turbulence, etc. between the wheel and the fixed cutting sleeve, the material is cut in the shearing seam and quickly broken into 200nm-2um particles. Because the emulsification pot is in a vacuum state, the material is The air bubbles generated during the stirring process are drawn away in time.Characteristic ·With hydraulic lifting system, the lid can be raised and lowered freely. ·The mixing system adopts double scraping side mixing frequency conversion speed regulation, which can meet the production requirements of different processes. ·Advanced homogenizer, unique structure, reliable sealing (mechanical seal is German ), emulsification speed is 0-3500 rpm (German Siemens frequency converter) ·The material is imported SUS304 or SUS316L stainless steel, and the tank and pipes are mirror-polished, which conforms to