High Quality 1200lm CREE LED Diving Lamp Flashlight

Basic Info.Model NO.W28-IIUsageProfessional Diving Video LightPower SupplyRechargeable BatterySwitchPress Button SwitchCharging typeRechargeableRuntime Low > SosReflectorWithout ReflectorLens4 mm Toughened GlassAngle of Light Beam30°-110°ColorBlackBattery18650 Li- Ion Battery *1Warranty3 YearsPackage18650 Battery, Hand Strap, O-Ring, Ys-24 ArmingTrademarkARCHONTransport PackageEVA Gift BoxSpecificationEVAOriginShenzhen, Guangdong, ChinaHS Code85131010Product DescriptionModel No.W21VP Diving Video Light&Spot light LEDWhite(Video light) CREE XM-L2 U2 LED*2pcs(Max 1300 lumens), White(Spot light) CREE XM-L2 U2 LED*1(Max 860lumens), Red CREE XP-E N3 LED*2( 620nm, max 200lumens)Runtimehigh: 1.5 hours(white video light), 2 hours(white spot light), Red 3 hoursOutput levelshigh > low > SOSReflectorglossy aluminum reflectorLens4 mm toughened glassBody materialdurable aircraft-grade aluminumAngle of light beam110° (white video light) & 30°(white spot light)Surface treatmentpremium Type III hard-anodizingColorBlackBattery18650 Li-ion battery * 1With battery over-discharging protection, polarity reversing protectionOperation voltage4.5 V to 2.8 VWaterproof100 Meters underwaterDimensions134 mm (length) * 36 mm (dia. of lamp head) * 24.3 mm (dia. of lamp body)Weight in airca. 127 g. (without battery); ca.176 g. (with battery)Underwater weightca. 92 g. (with battery) LOW BATTERY WARNING:The light flashes 3 times when the power capacity reaches 10-5%; it repeats after 5 seconds, and then switches to lower brightness. The light switches off automatically when the power capacity is less than 5%. BATTERY INSTALLATION:1. Hold the light with its head pointing upward, unscrew the light head.2. Remove the used battery from the battery compartment, if there is any; and put in the fully charged battery per polarity signs.3. Screw light head down. Do not over tighten to break the O-ring. BATTERY CHARGING:1. Plug the charger in the power socket, and the charger's indicator light is green in the   free-load status.2. Plug the battery in the slot of the charger. The charger's indicator light is red if the charging is in process; and it turns green after the charging is completed.3. After the battery is fully charged, unplug the charger, use or store the battery properly. MODES CHANGING:Continuously quickly press the button switch to cycle through high, medium and off. The light can also be turned off at high brightness level by a user's long pressing the button switch for three seconds.2. After each pressing, the switch will bounce back to its original position automatically.