Commercial Non Slip Stair Nosing for Stair Edge Trim

Commercial Non Slip Stair Nosing for Stair Edge TrimBrief description of aluminum stair nosing The aluminum stair nosing with carborundum grit surface insert provide the ultimate safety solutions for steps. Carborundum insert provides the highest possible safety rating and is suitable for external/internal areas.   The aluminum stair nosing supplied pre-drilled, counter sunk and cut to length, with all necessary screws and anchors, ready to install. Once installed, any unsightly screws are concealed to ensure the product can not be tampered with. So your investment will continue to look great for a long time.  General informaton for aluminum stair nosing   Productaluminum stair nosingMaterialsAlloy 6063 Temper T5; Galvanized SteelInfill MaterialCarborundum, pvc(if needed)FinishAnodized aluminium, mill finish or powder coatedCertificateISO, SGSApplicationBoth indoor and outdoor steps, carpet, vinyl floor, ceramic tilesColoursBlack, Safety Yellow, Blue, Red or customizedMOQ100 metersSample time3-5 working days for stair nosing insertPayment TermsT/T, L/C, WESTERN UNIONPictures for referenceCompany introduction---about MEISHUO Nanjing MEISHUO Building Materials Co., Ltd, founded in 2000 in China, has more than 12 years' experience in designing, manufacturing and installation of expansion joint covers systems (floor, wall and ceiling, roof),Movement joint,Aluminum Entrance Mat,Anti Slip Stair Tread Nosing, Landscape Grids, Grates, and so on.Installation Guide of aluminum stair nosing  Make sure the sair edges are clean enough first. 1. Clean stair edges with acetone. 2. Apply liquid nails to base of Stair Nosing. 3. Firmly sit Stair Nosing onto stair edge. 4. Drill holes using masonary bit. 5. Gently tap in the fixing. 6. Screw the fixing up tight. 7. Clean top recess with acetone. 8. Finish installation of stair nosing profileFAQ for aluminum stair nosing 1. Factory?   Yes. MEISHUO is a 14-year factory, leading manufacturer of stair nosing, expansion joint and movement joint system, skirting, aluminium entrance mat and so on. 2. Where is your factory located? Our factory is in city Nanjing, near Shanghai, 2 hours by plane to Guangzhou. Welcome to visit our factory! 3. Samples available? Yes. We're glad to produce samples for evaluation, normally samples be ready in 3-5 days. 4. Customized sizes or designs available? Yes. We're glad to manufacture the goods according your drawing or sizes by opening new mold if necessary.Meishuo Warranty Meishuo warrants that its products are manufactured free of defects and conform to the technical data listed. Under this warranty, we will replace any material proven defective when applied in accordance with our written instructions for applications recommended by us as suitable for subject products. Meishuo shall not be liable for any injury, loss or damage, direct or consequential, arising out of the use of the productContact us  Jackie Liu Mob: 0086-15250962725      /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1