3-Dg-190 6V190ah Deep Cycle Lead Acid Golf Cart Battery

3-DG-190 6V190AH Deep Cycle Lead Acid Golf Cart BatteryDescriptionProduct Features:1.Pb-Ca-Sn alloy,no Cd,environmentally-friendly2.High purity raw material and patent EV deep cycle formula of AM3.High performance AGM separator4.Excellent cycle life and recovery performance during deep cycle use5.Dry Charged &sealed construction and Maintenance free6. 6V/8V/12V optionalApplication:Electric Bike,Electric Motorcycle,Wheelchair,Electric Tools,Golf car,Electrical tractor,Farm EquipmentCompliant Standards:GB/T 22199-2008GB/T18332.1-2009Passed ISO9001,2001; ISO14001,CE certificateCharacteristic: 1, excellent performance of the battery charge so that you can use the loading, replacing the initial charging your troubles. 2, sufficient battery capacity to ensure good high-rate batteries, high-current discharge performance starts. 3, advanced alloy formula with high purity polyol lead-based alloys, so that the grid has good corrosion resistance, little analysis of gas, water, low loss, low self-discharge to ensure long battery life. 4, high-quality selection of imported separator resistance, corrosion resistance, small pore size, pore rate of import PE separators. 5, the advanced design of novel cell integrated structure design, make sure the battery nice, easy loading and unloading.               Application:Electric Bike,Electric Motorcycle,Wheelchair,Electric Tools,Golf car,Electrical tractor,Farm EquipmentCertificate: ISO9001:2000,ISO14001,ISO/TS16949, SGS,CE,ROHS, SONCAP The dimension of battery conforms to the standard of GB,BS,DIN,ect. Lead-acid battery Used as Power Resource for Electic Motor CarsDaily maintenance of lead-acid traction batteryA. Daily inspection1, the liquid surface: once a week to carry out a full inspection of the liquid surface (under high temperature        three days or so to fill a distilled water or deionized waters). If the electrolyte level is too low, it will lead to the battery plate, partition damage and shorten battery life. The liquid surface observation method: First opens adds the liquid cap, in below the liquid Cap bottom platform, indicates that the liquid surface is too low should replenish the water in time; 2, wiring column, wire, lid: Must often check the junction of the battery terminals, and wire connection at the      junction of the corrosion caused by oxidation, at the same time check whether the lid deformation, whether there is heating phenomenon. 3, Appearance: dirty battery surface will cause leakage, should keep the battery surface clean, dry. B. Maintenance 1, fill the water: according to the prescribed level of liquid to add distilled water or deionized waters, not to extend the interval of water and add too much distilled water, too much will lead to the proportion of decline, overflow electrolyte, and thus corrosion box and cable, affecting battery life or leakage. 2. Charge: The battery will produce gas during charging, keep the charging place well-ventilated, there is no open fire around, and the oxygen and acid gas produced during charging will affect the surroundings. During charging, unplug the charge plug will produce arc, should be filled with motor close to unplug the plug. After charging a lot of hydrogen in the battery, do not allow any open flame, should lift the battery on the cover plate to charge. 3. Balanced charge: The battery pack should be a balanced charge each month (that is, a small current for a long time) to maintain the battery capacity and prolong battery life. Balanced Charging Method: First the battery to normal charge, to be charged complete, press the balanced charging file, 24-36 hours of continuous charge is advisable. In a balanced charge, the voltage, density and temperature of each battery shall be measured and recorded, and the density and liquid level of the electrolyte should be adjusted to conform to the specification of the instructions before the charge is completed. 4, wiring column, wire (connecting plate), cover maintenance: must be designated by the manufacturer of professional and technical personnel to carry out. 5, clean: The battery should keep the surface clean, such as surface dirt will lead to short circuit, also can cause pole column and connection strip corrosion. Please use wet cloth when cleaning, otherwise it will produce static electricity. such as the bottom of the leak-free hole, as far as possible to avoid water flushing, so as to prevent excessive corrosion in the box, such as the bottom of the leak hole can be used in the open water slowly flushing. C. Custody 1, the safe place: cannot make it short circuit, because the rain caused short circuit may produce the fire, and may produce the small amount of hydrogen, therefore must store the battery in the ventilated, the cool place. 2, used batteries: waste batteries still have electrical energy, should be in accordance with the use of storage methods of battery storage. D. operation of Electrolyte 1, check the specific gravity: the use of suc