Lower Arm with Ball Joint Control Arm Tie Rod End Rack End

Lower Arm with Ball Joint Control Arm Tie Rod End Rack End    Product DescriptionWhat are control arms?Control arms, sometimes called "A arms," are the core of your front suspension system. In simple terms, control arms are the link that connects your front wheels to your car. One end connects to the wheel assembly and the other end connects to the framework of your car. The upper control arm connects to the uppermost area of the front wheel and the lower control arm connects to the lower most area of the front wheel, with both arms then attaching to the frame of the car. If you have independent rear suspension, the design is similar. In simple terms, control arms are the link that connects your front wheels to your car.What are the types of control arm suspensions? The most common types of control arm suspensions are: Control arm type suspension Strut type suspension Strut type designs have a lower control arm but no upper control arm. In strut designs, the strut becomes the upper control arm and is sometimes connected directly to the spindle or the lower control arm.How do control arms work? A. Each control arm is connected to the vehicle frame with two control arm bushings. These bushings allow the control arms to move up and down. B.The opposite end of the control arm is attached to a steel spindle. The spindle is what the front wheel is bolted to. On non-strut equipped vehicles, the spindle is attached to both the upper and lower control arms with a ball joint. The ball joint is a steel ball enclosed in a steel socket that allows the spindle and front wheel to rotate left and right and allow the wheels to move up and down following the roads surface. C.Sandwiched between the control arm and vehicle frame, positioned in a spring socket, is a heavy steel coil spring that supports the weight of your vehicle and provides a cushion against bumps. D.To combine the two opposite motions on each end of the control arm, the arms are tied on the frame side to pivot up and down on the control arm bushings. On the opposite end, the control arm is tied to the spindle and front wheel with upper and lower ball joints. The coil spring supports the weight of the car and dampens the shock of road surfaces.To ensure that the control arms, bushings and ball joints are in perfect alignment, some control arms include adjustable attachment points at the frame. When necessary, a mechanic can align the front end and keep your car driving straight down the road.    Mold MaterialDC01,DC04,DC06Tooling life Time100K timesTooling Material1) AL1060, AL6061, AL6061, AL5052 2) Steel, mild steel, SPCC 3) SS201, SS303, SS304, SS316, SS316L 4) SPTE, galvanized sheet 5) Brass, copperSurface TreatmentAnodized, powder coating, lacquer coating, black oxideSalt and spy testFrom 72-480 hSize1) According to customers' drawings 2) According to customers' samplesDrawing Formatstep, dwg, igs, pdfCertificatesISO 9001:2015 & IATF 16949Payment TermT/T, L/C etc Production process       1. Tooling (Mold) design and Manufacture.        2. Manufacture the parts according to the Stamping Machine.        3. Riveting, Welding or Screw tap according to Customer's require.        4. After finish manufacture process we will test the parts by the Image measurement instrument, Caliper,        Angel Gage etc.        5. After make sure all the dimension can reach customer's require, we will make the surface treatment         process.        6. After finish surface treatment we will testing all the parts by worker so that we can make sure the parts         which we sell is 100% qualified.        7. After finish testing we will pack the parts by Vacuum Package Machine.Our Advantages1.Rich production experience and a strong Engineer Team to assist with product development design for manufacturability. 2.Independent design and development capabilities with automated equipment and high-precision molds.3.Dedicated customer service and technical support. We can ensure delivery within the agreed time and One Year Warranty.4.100% new construction Full range of products.Not selling inventory products can guarantee the service life of products.Quality control         *We have specialized QC testers to check the quality of the products according to different customers'         requirement. Usually, it's random inspection, and we also offer 100% inspection at a reasonable price         if required.         *We have IQC to check the dimensions and surface of the incoming material         *We have PQC to inspect full-course during the manufacturing processing         *We have FQC to inspect all the anodizing/plating and other finishes' products from our supplier and         proceed with the professional quality and appearance inspection before shipping.   Packaging & Shipping        1.Packing Detail: The product packed in bag, carton, wood case, pallet or as per the customer's        special requirements. Besides, the custom package takes a week to prepare in advance.        2.De